You may have had to deal with anti-storm and flying debris windows and doors that come loose and can fly into the air. They can be extremely dangerous, but they can also be very expensive to fix if you are unfortunate enough to experience them. Not only do these objects come into your home, they can also cause injury to you, your family, and other people in the area. To prevent this from happening, it is vital to make sure that you properly seal all of your windows and doors to protect you and those in your home.
The first thing to consider when sealing any debris windows and doors is if you can. If you have a professional impact window and door installer that is well versed in this matter, they can install the window and door. If you are installing the window and door yourself, there are several steps you can take to ensure that your door and window stay as sealed as possible. First, you will want to find out what type of sealer you are going to need. There are many types of sealers available to choose from, so it is best to get some advice before you go out and buy the sealer.
Once you have determined what type of sealer you will need, you will then want to remove the old windows or doors and place them on a flat surface. This will give you the proper surface to place the new sealer. Before you begin applying the sealer to the surface, you will want to be sure that the surface is clean and free of dirt. To do this, you will need to use a vacuum to sweep the surface. Make sure that the area is clean before you apply the sealant.
After you have cleaned up the area, you will then want to place the debris window and door in a place that is safe and not prone to wind. To do this, you will want to place the old window or door in a location where there are no trees or buildings near it. Then, you will want to cover it with cardboard so that it is secure. You can also put some weather stripping around the edges to keep the moisture from getting inside and damaging the door and windows.
Once you have covered the debris window with weather stripping, you will then want to spray the sealant over the surface. You will want to do this by spraying from side to side so that you are covering the entire area. This will help to seal the surface and allow for more protection.
When you have finished, you will then want to clean up any spills that may be on the debris window and door. If any liquid gets on the door or windows, you should clean it up quickly before it gets any worse. Otherwise, you may need to replace the window and door as soon as possible.